Wurth Brake Fluid Dot 3 (250-500ml)

For hydraulic brake and clutch systems.

Excellent resisting gas block performance

Ensure the brake safety under high temperature.

Excellent fluidity at low temperature

-40 oC Kinematics viscosity ≦1500 mm2/s

Outstanding corrosion protection

Excellent performance of resisting metal causticity.

Compatible with rubber

Complies with specification SAE J1703; FMVSS116 DOT3；ISO4925and GB12981-2012.

Notice

• The brake fluid is easy to absorb moisture from the air, therefore the cap of bottles must be screw down after using it.
• The brake fluid can erode the paint of automobiles, therefore the brake fluid do not drop on it and must be wipe immediately if dropping occur.
• Stored it in the location of avoiding sunlight, cool and dryness.

Application

Application area

• Change brake fluid in accordance with vehicle manufacturer’s instructions. Do not mix with automatic transmission fluids (ATF) or mineral oils.

Instructions

• Replace it per year or per 20,000 kilometers

Technical information

Contents : 500 ml

Shelf life from production : 24 Month

Min. wet boiling point : 140 °C

Min. dry boiling point : 205 °C

Density : 1.089 g/cm³

Density conditions : at 25°C

pH value : 7-11