Liqui Moly Underseal Bitumen, black (1L)

Lasting, thixotropic and rapid drying corrosion protection based on special bitumen/wax additives. After evaporation, a highly adherent, tough and resilient film remains which provides protection against environmental effects, corrosion and stone chipping.

For coating bare and painted surfaces, primarily on vehicle underbodies, and for touching up or supplementing existing coatings.

Applic­a­tion

Clean the surfaces to be treated thoroughly in advance and remove rust. The surfaces must be dry and free of wax, dirt and grease and extensively free of dust. Shake well before use! Can be applied with the UBS Spray Gun (part no. 6219) or the Compressed Air Can Gun (part no. 6220) at an operating pressure of 3 – 4 bar depending on the desired spray pattern. The ideal spraying distance is approx. 30 cm. Can be applied without mist, no stringing and does not drip.

Recommended application temperature: 15 – 25 °C

We recommend applying thin coats. Depending on the desired layer thickness, intermediate drying should be carried out after each layer.
Do not leave containers standing open as the material will form a skin on the surface.

Other inform­a­tion

Optimum processing at 25 °C product temperature.
Do not spray onto moving parts and hot components such as mechanical joints, the engine, transmission, cardan shaft, exhaust pipe, catalytic converter and brake systems!

A clogged spray gun can cause the can to burst!

Note the operating instructions for the spray gun.
After use, clean the spray gun using the cleaner intended for the purpose.